
NASA's Perseverance rover and Mars Odyssey orbiter suffer glitches
NASA reported problems with the Perseverance Mars rover and Mars Odyssey orbiter, pausing rover science as engineers work on radio faults and an orbiter reaction wheel issue.
NASA reported problems this week with the Perseverance Mars rover and the Mars Odyssey orbiter. The rover's communications issue has paused science operations because of low data rates, while the orbiter's reaction wheel problem could end its mission. Engineers are working on both spacecraft.
Odyssey orbiter faces possible end of mission
The 2001 Mars Odyssey reached orbit around Mars in October 2001 to search for evidence of water and ice on the surface. The mission was supposed to last two and a half years, but operations have been extended for a quarter of a century.
The spacecraft has had ups and downs, including the failure of one of its four reaction wheels in 2013. Three reaction wheels are needed to orient the spacecraft; otherwise it must fall back to hydrazine thrusters.
Earlier in November, between the 4th and 6th, Odyssey dropped into safe mode. Engineers determined the cause was one of its remaining reaction wheels stopping spinning. Science data stopped flowing as the team worked to recover the component, and the wheel moved when commanded.
If the thrusters need to be used, only a few months of fuel remain. Odyssey is part of NASA's Mars Relay Network and sent back the first post-landing images from the Phoenix lander and the Spirit, Opportunity, and Curiosity rovers. Its loss would be keenly felt.
If the orbiter is approaching the end of the road, the European Space Agency's Mars Express and Trace Gas Orbiter could pick up some of the load. A former ESA insider said Mars Express is a science mission that can do relay, while Trace Gas Orbiter is a relay mission that also does science. NASA says Trace Gas Orbiter already sends the most relay data from Mars to Earth.
Perseverance rover communication issue
On October 30, the rover's main computer detected problems with the primary radio when a series of "heartbeats" from the device did not arrive as expected. It automatically switched to a redundant backup radio and placed itself in a protective safe mode.
Engineers brought the rover back from safe mode and analyzed the data. They found the backup radio was not performing as it should and was operating at approximately half of its expected power output. Both radios were therefore deemed inoperable until the team gets to the bottom of the issues.
The rover has used X-band communications over its high-gain antenna to talk to Earth ever since. That connection provides a significantly lower data rate, so science and instrument operations are on hold. Engineers are working first to return the backup radio to operational status, then to address the primary.
Sources: The Register
SiTech — AI-powered web development
We build fast, modern websites and bring AI into real business workflows. Have a project or a question? We'd love to help.